GNSS-S, Splitter
GPS/GNSS Splitter connects an external antenna to two receivers or repeaters simultaneously. GNSS/GPS splitters are optimized to pass signals within the GNSS frequency range. Rugged construction ensures performance on land, sea or air. TECHNICAL DETAILS. Supports GPS L1, GLONASS G1, Beidou B1, Galileo E1.
With the ROGER™ GNSS Signal Splitter, is a signal splitter that is used to distribute GNSS signals to several Repeaters. Splitter works with GPS L1, GPS L2/GLONASS/GALILEO frequency bands. It has one chaining output and four repeater outputs. DC power is passed from the chaining output to the input connector for line amplifier and GNSS receiving antenna.
ROGER™ GNSS Splitter is a one to five signal splitter with an output of -4 dB (1 port) and -12 dB (4 ports) that can transmit signal to up to five separate GNSS repeater units. The splitter is easy to use and permits a wide range of system configurations.
Size: | 110*143*28mm |
Weight: | 135 g |
Operating Temperature: | -25 – +55°C |
Connectors: | TNC female input TNC female output |
Frequency range: | 1200-1700 MHz |
Noise figure: | <5 dB |
Impedance: | 50Ω |
Gain: | +16dB |
Power supply: | The amplifier is powered through the RF input connector from the ROGER GNSS Repeater |